Induction heater for auto body dents 1000W

The dent repair tool can flameless heat the panel behind the paint from the outside of the panel, and the body is restored to its pre-deformed position by induction heating expansion, which is not harmful to the paint.
With a maximum output of 1.38KW, this dent repair tool effectively repairs small dents on body and door surfaces. It saves you a lot of time during the repair process.
The induction heater has multiple heat dissipation ports at the back and bottom, which can effectively dissipate heat and prolong the service life of the machine.
The induction heater with adjustment buttons, you can select the right power by the up or down button to repair different degrees of dents more precisely.
The metal body has a smooth surface for easy cleaning. You can wipe it with a wet rag after the power is off.

Voltage 220V, 50Hz
Power supply cable 1.5 m
Power 1.38 kW / 3.0 kVA / 1000W
Operating frequency 150 kHz
Dimensions 135 x 250 x 75 mm 
Weight 4.0 kg

12 month warranty 

Notes
1. To avoid causing damage to surface painting, do not apply heating on a single dent for a long time.
2. After 3-5 times heating, use a wet towel to reduce surface temperature.
3. Do not let the heating head touch the surface painting, leave a gap of 3-5mm.
4. During the heating process, the painting surface becomes soft, applying pressure on the surface will increase the dent.