Pressure plate for grease gun 290mm (56/60mm)

The pressure plate for filling the oil press is used to cover the top of the oil barrel to make it easier to fill the oil press. One barrel can be used as long as the residual amount in the barrel is very small. When filling the oil, the oil press will not get dirty and will not be wasted
Suitable for oil barrels with a diameter of up to 28 cm, can be used for barrels of 15 kg or more
Suitable for 600cc oil presses ex. LT019
Soft silicone sides will press the oil remaining on the walls and you will not waste it
Silicone is resistant to wear and pressure. Silicone will not deform or tear even after long-term use  

Usage:

1. Screw the grease gun into the plate
2. Insert the plate with the gun into the grease barrel
3. Press the plate down and at the same time pull the gun tip to draw the grease in
4. Unscrew the grease gun from the plate