Каталог товаров

Pneumatic brake bleeder with filler system and adapters

  • This brake bleeder kit is used for changing brake and clutch oil, as well as suck out old oil and air from replaced brake system on motorcycle car truck and pickup
    Connect the extractor to the air compressor and brake caliper, turn on high power air compressor to 90-120PSI, negative pressure is generated in the braking system to suck out the waste fluid and air, and guide the new oil to fill the whole brake system
    Automatic brake oil refill device: there is a long screw fittings on 0.75L refill bottle cap, which can work with the master cylinder adapter to snap on the mouth of the vehicle's brake fluid reservoir, without hand support
    Fully open the valve on the long screw, the fluid will flow out, and stop once the brake fluid level in the reservoir has been sufficient to cover the threaded port, no need to keep an eye on it
    On the 1L waste oil extractor bottle, there is a the hanger which can hook on the engine hood and keep the bottle above the vehicle bleeder valve, as well as the trigger locker is also helpful for hand-free when suck
    Also, you do not need to tread the brake pedal again and again when use this brake and clutch bleed tool
    The brake system bleeding tool kit includes 4 master cylinder adapters for most vehicle models, 21 to 30 mm, 24 to 32 mm, 28 to 37 mm, 32 to 41 mm
    2 types 1/4"-18NPT air quick plugs, American style and European style
    1.8 m long transparent hose is good for monitoring the working situation easily, with universal black tapered nipple for connecting caliper bleeder valve threads
    Inlet pressure 6 - 8 bar
    Tank capacity 0.75 l
    Air consumption 180 l / min
    Vacuum 60 %
    External connector 1/4"