EUR

You might also like

Home /

Measuring and marking tools


Measuring steel tape with stop

Code: 10120

Plastic housing
Decimal points marked red
Automatic tape return and tape locking

Code Product variants More info. Price Amount   Total with VAT
10122 2m x 16mm More 0,93
0,00
10123 3m x 16mm More 1,16
0,00
10125 5m x 19mm More 1,62
0,00
10128 7.5m x 25mm More 2,88
0,00

Measuring steel tape with stop

Code: YT7105GR

Code Product variants More info. Price Amount   Total with VAT
YT71055 3m x 16mm More 2,11
0,00
YT71056 5m x 19mm More 2,98
0,00
YT71057 5m x 25mm More 3,48
0,00
YT71058 8m x 25mm More 4,94
0,00

Measuring fiberglass tape

Code: 1400

Glassfibre tape, stretch and wear proof, wipeable
Impact proof plastic housing
Foldable handle

Code Product variants More info. Price Amount   Total with VAT
14100 10m x 10mm More 1,82
0,00
14200 20m x 10mm More 3,07
0,00
14300 30m x 10mm More 4,65
0,00

Laser distance meter

Code: YT73127

Laser range finder for fast and accurate distance measurement from 0.2 to 60 m. It is equipped with many functions (continuous measurement functions, surface and volume calculation, Pythagorean theorem, 20 results memory, variable starting point, changing units, continuous slope measurement for distance measurements). The next generation of YATO laser rangefinders are used for professional purposes in the construction, industry and other industries where fast and accurate measurements are needed.

Features:
Calculation of continuous measurement function, area and volume
Indirect measurements (Pythagorean function, trigonometric functions, basic mathematical operations)
Memory of last 20 results
Continuous tilt measurement
Variable starting point
Possibility to change units
10 operating modes
Battery status indicator
USB Type-C
Strong, stable housing with protection class IP65 (protection against dust and water)
Laser class - 2
Wavelength 630 - 670 nm
Measurement range - 0.2 - 60 m
Measurement accuracy is 2 mm at 60 m
Angle measurement accuracy is 1
Units - meters / feet / inches / feet + inches
Memory - 20 measurements
Power supply - 3 x 1.2 / 1.5V (AAA) Ni-MH
Protection class - IP65
Dimensions - 115 x 49 x 25 mm
Total weight - 0.35 kg

Code Product variants More info. Price Amount   Total with VAT
YT73127 Laser distance meter More 68,97
0,00

Digital infra-red thermometer

Code: AT7040

Spot ratio 12:1
Measurement units C and F
Temperature range from -32 up to +535C (from -25 up to +999F)
Accuracy 2% arba 2C
Thermopile 5-14m
Resolution 0.1C (0.1F)
Response time 500ms
Operating temperature from 0 up to +50C (from 32 up to 122F)
Humidity 10-90% RH
Auto power off after approximately 6s
Battery 9V DC, type: 006P, IEC6F22, NEDA1604
Battery working time 16hrs
LCD display
Dimensions 170 x 133 x 45mm
CE conformity

Code Product variants More info. Price Amount   Total with VAT
AT7040 Digital infra-red thermometer More 54,45
0,00

Paint thickness tester 0-2mm

Code: 81731

Electronic meter that allows checking the thickness of the lacquer layer on aluminum and steel coatings. It enables easy detection of body parts that are repaired or repeatedly painted

Measurement in the range of 0 - 2 mm
Accuracy of measurement +/- 2%

Press the "TEST" test function while measuring and add a measuring sensor to the paint surface

Code Product variants More info. Price Amount   Total with VAT
81731 Paint thickness tester 0-2mm More 25,41
0,00

Digital clamp meter

Code: 81801

The universal clamp meter is a digital measuring instrument designed for measuring various electrical quantities. For some measurement quantities, the meter can choose the range itself depending on the measurement result. The meter has been equipped with measuring clamps allow the measurement of alternating current in a single wire by the induction method. Thanks to this, it enables the measurement of much higher current than in the case of conventional electric meters. The clamp opens up to 25 mm and allows the measurement of a cable with a maximum diameter of 19mm. Clamp meter has an LCD display that allows you to display the max 1999 result. In addition, the DATA HOLD function allows you to save the currently measured value on the display

Alternating voltage: U a.c. 0 450 V
DC voltage measurement U d.c.: 0 - 600 V
Alternating current: I a.c. 0 - 400 A
Resistance: R 0 - 200 k? OHM
Diode test: IF 1 mA
Sampling frequency: 3 / SEC
Circuit continuity test
Diode test
The sound signal allows easy verification of circuit continuity
The meter is powered by two 1.5V (AAA) batteries (not included)
The set includes test leads

Code Product variants More info. Price Amount   Total with VAT
81801 Digital clamp meter More 17,42
0,00

Digital universal multimeter

Code: 81773

D.C. Voltage 0 - 600V
A.C. Voltage 0 - 600V
D.C. Current 0 - 10A
Resistance 0-2M OHM
Transistor test hFE PNP, NPN
Diode test IF 1 mA, UR 1,5 V
Circuit continuity test
CE conformity

Code Product variants More info. Price Amount   Total with VAT
81773 Digital universal multimeter More 9,51
0,00

Digital universal multimeter

Code: 81774

D.C. Voltage 0 - 500V
A.C. Voltage 0 - 500V
D.C. Current 0 - 10A
Resistance 0-20M OHM
Battery test 1,5 V, 9 V, 12 V
Diode test IF 1 mA, UR 1,5 V
Circuit continuity test
CE conformity

Code Product variants More info. Price Amount   Total with VAT
81774 Digital universal multimeter More 9,51
0,00

Center punch

Code: S907500GR

Tapper point end
Material CrV
SATA

Code Product variants More info. Price Amount   Total with VAT
S90751 4x120mm More 2,35
0,00
S90762 5x150mm More 3,25
0,00

Digital universal multimeter

Code: 81775

D.C. Voltage 0 - 1000V
A.C. Voltage 0 - 750V
D.C. Current 0 - 20A
A.C. Current 0 - 20A
Capacitansy 0 - 200uF
Resistance 0-200M OHM
Transistor test hFE PNP, NPN
Diode test IF 1 mA, UR 1,5 V
Circuit continuity test
Auto power off
CE conformity

Code Product variants More info. Price Amount   Total with VAT
81775 Digital universal multimeter More 11,76
0,00

Digital universal multimeter

Code: 81783

D.C. Voltage 0 - 600V
A.C. Voltage 0 - 600V
D.C. Current 0 - 10A
A.C. Current 0 - 10A
Resistance 0 - 200M OHM
Capacitansy 0 - 20uF
Frequency response 20kHz max
Transistor test hFE PNP, NPN
Diode test 1mA, 2,8V
Circuit continuity test
Auto power off
CE conformity

Code Product variants More info. Price Amount   Total with VAT
81783 Digital universal multimeter More 20,33
0,00

Digital universal multimeter

Code: 81784

D.C. Voltage 0 - 600V
A.C. Voltage 0 - 600V
D.C. Current 0 - 10A
A.C. Current 0 - 10A
Resistance 0 - 200M OHM
Capacitansy 0 - 20uF
Frequency response 20kHz max
Temperature range -40 +400C
Transistor test hFE PNP, NPN
Diode test 1mA, 2,8V
Circuit continuity test
Auto power off
CE conformity

Code Product variants More info. Price Amount   Total with VAT
81784 Digital universal multimeter More 26,79
0,00

Aluminium try square

Code: YT708GR

Code Product variants More info. Price Amount   Total with VAT
YT7082 350mm More 7,26
0,00